POWER ONLINE PRODUCT SHOWCASE

• Model 42i HL High Level NO-NO2-NOX Gas Analyzer

  Using chemiluminescence technology, the Model 42i HL measures the amount of nitrogen oxides in the air from sub-ppb levels up to 100ppm.The Model 42i HLis a single Chamber, single photomultiplier tube design that cycles between the NO and NOX modes

• Deltatop DP71B

  Differential pressure flow measurement with Pitot tubes and Deltabar differential pressure transmitter.

• Field Metallography Replicas may be produced on welds or base metal to identify the level of creep damage present or on a surface-connected indication to determine whether creep is the damage mechanism involved
• Regal R&O Regal R&O oils are turbine-quality circulating and compressor oils formulated to perform over a wide range of operating temperatures.
• Oils Shell TURBO IG Oil 32 is a highly refined paraffinic turbine oil formulated to meet the higher temperatures found in industrial gas turbines.
• CTX 2000 The Current Transformer Test Set has been designed to test current transformers for Excitation, Saturation, Ratio and Polarity by comparing Voltage
• Power-Harmonics Analyzer The Elcontrol NanoVI Plus is a digital power and harmonics analyzer in a handheld package
• 2-Gear Drive for Decanters The 2-Gear drive for decanters is designed for torque-dependent control of the differential speed
• Digestion System The 36-well HotBlock is a corrosion proof digestion system for metals analysis
• Outsourcing Outsourcing your water and wastewater treatment to USFilter can save you time
• Heat Balance Software Enter Software, Inc.’s GateCycle 5.0 for Windows 95/NT is a heat balanced software for the design and analysis of combined cycle and conventional steam plants...
• Technical Brochure For Liquid/Solid Separation The new technical brochure “Liquid/Solid Separation Systems” features a twelve-page, four-color layout, including standard system specifications and highlights the system’s features, benefits and applications...
• Dewatering Skimmer U.S. Filter/Link-Belt has developed the dewatering flight skimmer (DFS) in both primary and secondary...
• GENCLEAN Ind

  GENCLEAN™ Ind is an NSF certified specialized advanced oxidation treatment solution specially developed for wastewater treatment in industrial facilities.

• Model 48i CO Gas Analyzer

  The industry's new best-of-breed. Our customers told us exactly what they're looking for in a gas monitoring solution: reliability. simplicity, ease of use.

• CFX 4.1 Flow Solver Software Computational Fluid Dynamics Services (CFDS), a division of AEA Technology, has released the latest version of its general purpose CFD code, CFX 4, which is used throughout industry for the simulation of fluid-flow processes
• Prosonic Flow 93W

  The Prosonic Flow ultrasonic clamp-on system allows accurate and cost-effective flow measurement from outside the pipe and without the need to interrupt the process. The flow measurement is bidirectional and causes no pressure loss.

• DC Motor Parts Small DC motors are used as tachs for larger AC and DC motors
• Injection Molding Machines The Milacron-Apex-Quantum consortium recently collaborated on an injection molding that is designed to cut the cost
• Starters/Contactors The Spectra 700 and Spectra CA5F Control consists of contractors, overload relays, starters, control relays and accessories
• QuadraFlow Cooling Tower The first in the industry protected by a five-year total product warranty covering virtually every part of the tower.
• Air Intake Filter Housing Airguard Industries recently introduced Tri-Guard, the modular, heavy duty air intake filter housing used on gas turbines and other turbomachinery...
• GAS STATION™ From E/One GAS STATION is a new modular approach to gas control and monitoring for hydrogen-cooled generators. GAS STATION delivers the maximum in protective and performance optimization products and asset management services for the global power grid
• Magnetic Level Gauge Switch: LMS100

  The LMS100 is a magnetically actuated single pole double throw switch. When the LMS100 is mounted on a KM26 Magnetic liquid level indicator, LS Series Cage Level switch or an external chamber that contains a magnetic float, it can sense high or low point levels within a vessel.

• Temperature Measurement

  They are the Thermometers which cover the widest range of use, from factory utilities to chemical processes.

• Drive Speed Control The Infinite Ratio Drive is an adjustable speed coupling system for variable speed control in utility and large
• Condensate Treatment USFilter offers treatment technologies that reduce the losses or damage caused by corrosion and/or deposits
• Software Suite Essential EH&S Version 4.0, a suite of integrated solutions
• H2 Purity & Purge Gas Monitor AK100

  The H2 Purity & Purge Gas Monitor AK100 has be specifically designed to monitor hydrogen purity in hydrogen cooled generators.

• Interface Software Package MiddleLink Electric 3.0 succeeds the computerized DPA/G interface software package as the company’s full-featured electric distribution GIS integration tool
• Flame Stabilizers These patented circumferentially- and radially-staged flame stabilizers are designed to achieve dramatic NOx reduction
• Etanorm Water Pump

  The Etanorm water pump is a long-coupled, single-stage volute casing pump with ratings and main dimensions to EN 733 in back pull-out design, with replaceable shaft sleeves/shaft protecting sleeves and casing wear rings. It is ideal for applications including irrigation, drainage, district heating, water supply systems, heating and air-conditioning systems, condensate transport, swimming pools, fire-fighting systems, handling of hot water, cooling water, fire-fighting water, oil, brine, drinking water, and brackish water.  

• Harmonics Analysis Program The Harmonics Analysis Program has been designed to assist electrical engineers in solving harmonics problems
• CFX-TurboGrid Interactive Grid Generation Software Tool CFX-TurboGrid is interactive grid generation software tool for turbomachinery applications
• Promass 83F

  The Promass measuring devices make it possible to simultaneously record several process variables (mass/density/temperature) for various process conditions during measuring operation.

• Pollution Prevention Technologies in Enforcement Settlements The U.S. EPA has published, "Identification of Pollution Prevention Technologies for Possible Inclusion in Enforcement Agreements ...
• Liquiphant M FTL 51

  Wide variety of electronics, e.g. NAMUR, relay, thyristor, PFM signal output: the right connection for every process control system.

• Oil Purifier The HNP 021 Oil Purifier is said to remove essentially all free water, free gases, and entrained gases, and as much as 80% of dissolved water and dissolved gases from liquids
• Model 80i Mercury Analyzer

  The Thermo Scientific Model 80i analyzer uses an advanced cold vapor atomic fluorescence technology. This technology enables the Model 80i analyzer to provide continuous sample measurement, with no additional gases or accumulations required and virtually no interference from SO2. High sensitivity allows high sample dilution reducing moisture, heat, and interfering pollutants.

• Power Breaker The Magnum DS is a low voltage power breaker
• Spectrophotometer Spectronic Instruments, Inc. announces the GENESYS 5 Spectrophotometer
• Parson CA Liner 100 Parson CA Liner 100 is a structural, corrosion resistant lining to restore deteriorated sewage structures.
• Transformer Monitoring System The Transformer Guardian – Advantage Series is a transformer monitoring instrument for oil filled transformers
• Parsonpoxy FS2 PARSONPOXY FS2 is a 100% solids, moisture insensitive, non-sag epoxy paste that sets up in approximately 25 minutes and can be applied vertically, horizontally or overhead. Use to repair leaking or damaged manhole inverts.
• Carbon Adsorber Industrial activated carbon adsorbers eliminate volatile organic compounds (VOCs) and odors from industrial, municipal and commercial process exhaust streams
• Power Quality Instrument The PP1-R power quality instrument connects directly to Ethernet 10baseT and 10base2 networks
• GAA330-M Emission Monitoring System

  The GAA330-M is a CEM system designed to measure the gas pollutants SO₂, CO₂, and NO_X, as specified in MARPOL Annex VI. The GAA330-M operates with both high- and low-sulfur fuels, no matter if you are operating outside or inside an ECA. ABB has the right gas analyzer portfolio to allow vessels to stay compliant with current and upcoming regulations. The GAA330-M uses an Infrared photometer for reporting the SO₂/CO₂ ratio as specified by MARPOL requirements. NO_X is monitored with an ultraviolet photometer (UV) which is the most practical approach. ABB photometers are manufactured and designed for best performance under harshest conditions with an installed base of more than 100.000 units in global industries.

• Outage Management Our Strategic Performance Improvement (SPI) Methodologies for shutdown and project management and control have been tested in hundreds of complex major production plant shutdowns, outages, and equipment overhauls
• Industrial Data Communication Products Catalog Dataforth Corporation released its new Industrial Data Communications Product catalog...
• CHEMetrics Unveils Dissolved Oxygen Kits CHEMetrics, Inc. this week announced the application of their low-level dissolved oxygen kits for at-line testing or as back-up systems for on-line analyzers.
• Foot Shaft Components Part of the company’s line of intake system replacement parts, the foot sprockets are designed for years of service free operation.
• Thermo Scientific Air Quality Instruments Field Service Offerings

  Thermo Scientific Air Quality Instruments Field Service Offerings are designed to meet the technical and budgetary needs of your organization and optimize instrument performance.

• Web Tool This new Internet tool shows customers how much money their organization could save by using an integrated, enterprise-wide Environmental, Health & Safety (EH&S) information
• T-Mass 65F

  On board software freely allows the selection of up to 20 pure gases and creation of mixed gases with a maximum of 8 components (e. g. Biogas)

• Dry Electrostatic Precipitators The Dry Electric Precipitator (DESP) is designed as a solution for industrial and commercial applications
• Prosonic S FDU 91

  Ultrasonic sensor for non-contact continuous level and flow measurement; for connection to the transmitter FMU90/FMU95

• Deltabar S PMD 70

  Differential pressure transmitter with ceramic sensor: Overload-resistant and function-monitored, Communication via HART, PROFIBUS PA or FOUNDATION Fieldbus

• Static Shaft Sleeves Shaft sleeves from FMC Corporation are molded from polyurethane in specialized tooling
• Travel and Alignment Sensing System FMC Corporation’s Travel and Alignment Sensing System (TAS) was designed to electronically monitor retangular sludge collector systems...
• GAA630-M Emission Monitoring System

  The GAA630-M is based on a dry and extractive approach. The system is designed as a two housing solution. The continuous gas analyzers are engineered to fit in a small footprint IP65 compact cabinet, while the sampling system is mounted in a separate IP65 enclosure. The design complies to IMO MARPOL ANNEX 14 Res. MEPC 177 (58) (NTC) & IMO MARPOL ANNEX 9 Res. MEPC 184 (59). The sampling system is based on a continuous extraction cooling device, removing the moisture from the sample gas. Both cabinets are equipped with antivibration devices to reduce vibrations effects, maximize measuring performance and extend lifetime of the analytical and pneumatic components

• Thermo Scientific Air Quality Instrument Service Offerings

  Thermo Scientific Air Quality Instruments Included Services provide a complete support package with the purchase of your instruments or systems. As your partner, we supply all the necessary resources needed to meet your product demands.

• Small AC Motor Parts Small AC Motors consists of both fractional and integral alternating current motors
• GWT Zeroturb Bio-Organic Liquid Flocculant

  GWT advanced ZeoTurb™ is a unique advanced bio-organic liquid flocculant.

• Model 42i-D NOX Analyzer

  Using chemiluminescence technology, the Model 42i-D measures the amount of nitrogen oxides in the air from sub-ppb levels up to 100ppm. The Model 42i-D is a single chamber, single photomultiplier tube design that measures NOx only

• Cooling Water/Wastewater Treatment Systems Depending on the quality of the feed water source, the cooling circuit can be fed either directly from the pretreatment or from the boiler feed make-up water system.
• CFX-TASCflow Flexible Fluid Engineering Software CFX-TASCflow is a CAD-oriented software tool for fluid flow analysis and design optimization for mechanical engineering applications
• FTPA2000-HP460 - Gasoline And Diesel Final Product Blending Analyzer

  On-line Solutions for the Hydrocarbon Processing Industries.

• DC-DC Converter Lambda Electronics, Inc. introduced the SM20, a 20W surface mountable DC-DC converter
• Parson Injectable Foam Parson Injectable Foam is a CFC free polyurethane foam used to stop active hydrostatic leaks. Seals voids and stops infiltration of water into the sewage collection system. Sets in 45 seconds and functions as a permanent installation.
• Odor Control

  Combat odor and corrosion problems in your collection system with BlueInGreen technology. Designed to eliminate sulfide production by promoting an aerobic environment, our odor control solutions offer an effective alternative to chemical treatment in force main and gravity sewers. 

  BlueInGreen odor control solutions are designed to eliminate sulfide production by promoting an aerobic environment, an effective alternative to chemical treatment. 

• Topcal S CPC 310

  Topcal S CPC310 is the fully automatic measuring, cleaning and calibration system for pH and ORP measurement in hazardous and non-hazardous areas.

• Oxygenation | O2

  BlueInGreen technology utilizes a pressurized process to rapidly and efficiently dissolve oxygen in a side stream, offering multiple benefits in a host of municipal, industrial and ecological water treatment applications. Winner of the WEF Innovative Technology Award, BIG Oxygenation is the solution that started it all.

• Multitec High-Pressure Pump

  The Multitec high-pressure pump is available in size DN 32 to 150 with a flow rate up to 850 m3/h and fluid temperature from -10 to +200 °C. Applications include water supply, drinking water supply (ACS), industry, irrigation, power stations, heating, filtering, fire-fighting, reverse osmosis, snow guns, and washing plants.

• Boiler Feed Water Make-Up Systems The make-up water treatment system must continuously produce high quality demineralized water to the boiler to ensure the plant is operating efficiently.
• Trident LP Water Treatment System Triton underdrain eliminates gravel and the problems it can cause by replacing conventional filter blocks
• TALYS ASP400 Series Analyzer

  The TALYS ASP400 series analyzer is designed to achieve monitoring and control of continuous processes. Its seamless installation enables real-time process monitoring, determination of stream properties or physical qualities, process characterization and early troubleshooting.

• Packed Tower Scrubber The Packed Tower Scrubber utilizes a vertical counter-current design for efficient absorption of a variety of toxic gases
• Flow Measurement

  One for all - Endress+Hauser's multivariable metering. The ability to measure several process variables all at the same time opens up completely new application fields.

• Thermo Scientific Arke SO3 System

  The Thermo Scientific Arke SO3 System, with built-in SO3 generator, uses an advanced Quantum Cascade (QC) Laser-based platform to provide high sensitivity, optimum selectivity and a continuous, direct measurement of SO3 within tough industrial-plant process environments.

• Sauereisen Chemical-Resistant Castable No. 35 Sauereisen Chemical-Resistant Castable No. 35 is a gunitable, hydraulically setting, calcium aluminate cement. No. 35 is recommended for the protection of concrete and steel surfaces from high temperatures, thermal shock, abrasion and chemical attack by mild acids or alkalies.
• Promag 50W

  Modular device and operating concept resulting in a higher degree of efficiency

• Oxygen Sensor Module, Model 43i Series

  The Thermo Scientific Oxygen Sensor Module, Model 43i Series is a pulsed fluorescence gas analyzer with paramagnetic sensor technology.

• Navigator 600 Silica Analyzer AW641

  Many years of experience and innovation in the design and successful application of continuous chemical analyzers has been combined with the latest electronics and production technologies to produce the Navigator 600 Series of analyzers from ABB.

• Model 42i Y NOy Analyzer

  Using chemiluminescence technology the Model 42i-Y measures the amount of nitrogen oxides in the air from sub ppb levels up to 100ppm. The Model 42i-Y is a single photomultiplier tube design that measures NOy which includes most oxides of nitrogen with the exception of NH3 and N2O

• Class 600 Cooling Tower Splash-fill, wood-framed towers proven in hundreds of installations over the last thirty years
• Custom Designed Thermometers The Brooklyn Thermometer Co., Inc. has introduced a Custom Department to handle the design & manufacture of thermometers to satisfy special application requirements..
• Parson PermaSeal PARSON PERMA SEAL is a nonflammable, V.O.C. compliant polyurethane injection resin designed to control water and seal moving non-structural cracks in concrete. PARSON PERMA SEAL is a standard viscosity hydrophilic resin which, after coming into contact with water, expands quickly and cures to a flexible closed-cell foam.
• MS Cooling Towers For those installations where aesthetics preclude the use of a conventional cooling tower
• Rotating Machinery Software The CFX-VoluteGen provides designers of volutes and scrolls with a tool to interactively develop these components in a parametric environment with visualization in 3D
• Two-Wire pH/ORP Transmitter TBI-Bailey announces the release of the Model TB82 pH/ORP transmitter, the first instrument in its new Advantage Series...
• Baskets Part of the company’s line of intake system replacement parts, the baskets are designed to perfectly match existing baskets.
• Part-Turn Actuators Part-turn actuators with rated torque of 100 Nm ... 16000 Nm for the operation of final control elements with preferably 90° rotary movement such as flaps, cocks, dampers, etc.
• Electro-Pneumatic Positioners

  Smart electro-pneumatic positioners form the vital link between the control system and the valve.

• Demineralization: Recoflo® TriFlo™ Demineralizer Eliminate the need for mixed bed polishers or electrodemineralization systems to provide high purity water with conductivity less than 0.1 ìS/cm.
• Model 61i Multi-Gas Calibrator

  A critical component of the factory designed iMEGA Continuous Emissions Monitoring System, the Multi-Gas Calibrator, Model 61i accepts up to five calibration gases plus zero air and controls the calibration of gas concentrations for total accuracy assurance.

• Decanter The Hysep decanter features optimum capability for both dewatering and thickening at high capacity
• Thermo Scientific Model 410i Carbon Dioxide Analyzer

  The Thermo Scientific Model 410i Carbon Dioxide Analyzer utilizes advanced NDIR optical filter technology to measure the concentration of Carbon Dioxide in stack gas levels. Reporting capabilities are user-selectable for either of the accepted industry standards, straight extractive or dilution sampling methods.

• Power Quality Monitor The PQPager uses the IEEE 1159 standard to measure single or three-phase voltage sags, swells, interruption transients, waveform snapshots, and RMS strip charts
• MB3600-HP10 Laboratory Hydrocarbons Analyzer

  The MB3600-HP10 Laboratory Hydrocarbons Analyzer is not only a valuable and reliable laboratory analyzer in its own right; it also allows custom calibration model development for on-line hydrocarbon process optimization.

• Calibration: Beamex® MCS100 Calibration Workstation Calibration: A calibration workstation can be considered ideal when most of maintenance and calibration tasks are performed in the workshop. Beamex’s calibration workstation is a modular test and calibration system designed for use in workshops and laboratories.