Product/Service

WATERTRAK™ Regeneration Skids

Source: Aquatech International Corporation

RegenSkid
A regeneration skid is recommended to be used to prepare and regenerate a resin bed for service after exhaustion. These systems can be used with demineralizers, mixed bed exchanger as well as softeners

Click Here To Download:
Datasheet: WATERTRAK™ Regeneration Skids

A regeneration skid is recommended to be used to prepare and regenerate a resin bed for service after exhaustion. These systems can be used with demineralizers, and mixed bed exchangers. Regeneration skids give clients and operators the maximum flexibility and control on the amount of regenerant to be used and dilution water consumed during the regeneration. Aquatech designs its regen skids with a robust concept for durability, reliability and safety. The piping is selected for maximum chemical resistance and the skid framework is coated with a chemical resistant coating that insures durability. The system can be run in a manual, semi-automatic or automatic mode. The pumps are selected with either stroke or speed control for finite adjustments

Features

  • Single Skid Configuration
  • Hydraulically Operated Manual Diaphragm Pump with Internal Relief Valve
  • Block & Bleed Valve on Pump Discharge
  • Vortex Flowmeter on Dilution Water Piping
  • Concentration Analyzer on Dilute Chemical line
  • SS 316L Piping for Caustic Dilute H2SO4 & Dilution Water
  • CS Sch 80 Piping for Concentrated H2SO4
  • Sch 80 PVC Piping for HCl
  • Mixing TEE of Suitable Material
  • NEMA 4X FRP Local Control Box
  • PLC Controls in case of stand alone unit

Applications

  • Regeneration of Demineralization Vessels
  • Regeneration of Mixed Beds

Click Here To Download:
Datasheet: WATERTRAK™ Regeneration Skids