The new board level test monitor is designed to measure and provide analog output signals for all parameters of voltage, current and total power
Ohio Semitronics, Inc.rd level test monitor is designed to measure and provide analog output signals for all parameters of voltage, current and total power.
Optional outputs for power factor, apparent power "VA" and watthours are available as plug-in circuit cards. Analog outputs of 0 - 10 volts dc are standard or optional 0 - 1mA or 4 - 20mA levels are available.
The 10.75" x 8.9" x 2.5" circuit board is provided with mounting holes to fit a 10" x 12" NEMA case or the circuit board can be mounted in the user's cabinet with the stand offs provided. Input and output terminals are located directly on the circuit board.
All the electronics circuitry uses solid state multipliers, RMS converters and amplifier. The unit requires 115Vac instrument power.
The unit is calibrated at the factory to provide either 10V, 1mA, or 4 - 20mA for each full-scale input.
- Small Package
- Less Wiring
- High Accuracy
- Up To 9 Outputs
- Circuit Board Design
- Direct Input To 600Vac
- Low Cost
- Calibrated with CT's
<%=company%>, 4242 Reynolds Drive, Hilliard, OH 43026; Tel.614-777-1005 ext.308. Fax:614-777-4511.