With a surface resistivity range of 105 to 109 (ohms/cm2) TIVAR® AntiStatic handles tough conditions where dust and static electricity can cause problems.
Anti-static – protects against electrical charge build-up
No moisture absorption
If static electricity poses a significant problem in your manufacturing environment, take action by choosing TIVAR® AntiStatic. With a surface resistivity range of 105 to 109 (ohms/cm2) TIVAR® AntiStatic handles tough conditions where dust and static electricity can cause problems.
TIVAR® AntiStatic is an ideal material to use when potentially volatile conditions exist, such as those in grain elevators and munitions plants, effectively safeguarding against static discharges. In addition, it resists heat and protects robotics and other products that are sensitive to dust accumulation and electrical charge buildup.
Black TIVAR® AntiStatic is available in two standard sheet sizes: 48" x 120" sheets with gauge sizes ranging from 1/16" to 6"; 60" x 120" sheets with gauge sizes ranging from 3/8" to 1". It is also available in rod, board, tube, tape and profiles.
- Chemicals – explosives, munitions
- Grain Handling
- Package Handling
- Assembly conveyor components
- Chain guides
- Chute liners
- Conveyor components
- Discharge spout liners
- Guide rails
- Robotics parts
- Slide liners
- Table surfaces
- Transfer plates
- Trough liners
Poly Hi Solidur, 2710 American Way, Fort Wayne, IN 46809. Tel: 219-479-4100; Fax: 219-478-1074.