Product/Service

The Cyclonator

Source: Megator Corporation
The Cyclonator is a modular, recycling, high-pressure wash rack system that provides a cost-effective means of cleaning equipment while preventing ground water contamination and reducing water/sewage costs.
The Cyclonator is a modular, recycling, high-pressure wash rack system that provides a cost-effective means of cleaning equipment while preventing ground water contamination and reducing water/sewage costs.

Modular and portable, the Cyclonator can be easily expanded from 6' x 6' to 12' x 30'. It can be set up on virtually any hard surface, indoors or out, with no special plumbing or electrical hook-ups and no digging or concrete work.

The standard Cyclonator is a closed loop. Each wash rack is water tight and seals securely to adjoining racks to prevent gaps in containment. All waste water is captured and filtered. The result? Clean equipment, a safe environment, and no costly EPA fines.

Standard Equipment

  • Wash Racks
    • 10,000 lb capacity per 6' x 6' rack
    • Two each 3' x 3' steel ramps
  • Filtration System
    • Powder coated multi-compartment steel filtration chamber
    • Oil separating weir, oil skimmer
    • Clarifying chamber
    • Ozone injection and continuous recirculation from holding tank
    • One high capacity oil adsorbing bag filter
    • Three high capacity oil adsorbing cartridges
  • Fresh Water Holding Tank
    • 300-gallon polypropylene cone bottom tank with stand
Options
  • Over spray walls
  • Carbon filters
  • Ultra, nano and hyperfiltration (RO)
  • 25,000 lb capacity racks
  • Stainless steel filtration chamber and components
  • Higher flow rates

Megator Corporation, 562 Alpha Dr., Pittsburgh, PA 15238. Tel: 412-963-9200; Fax: 412-963-9214.