The Demand for Cleaner & More Affordable Energy Increases the Popularity of Gas Turbine Power Generation in Industrial & Commercial Co-Gen Power Plants
Arvada, CO (PRWEB) - Sundyne, a global leader in the design and manufacture of mission critical pumps and compressors, today announced enhancements to its “fit-for-purpose” centrifugal compressors that are used as fuel gas boosters for turbines generating electricity at refineries, chemical plants, hospitals, universities and other industrial co-gen facilities.
Co-gen power plants require gas pressures in the range of 250-750 psig to operate their turbines in an optimal fashion. Interstate gas pipelines transport gas at different pressures – ranging anywhere from 30 to 125 psig. In order to boost incoming gas pressures to levels required by turbines, many plants are deploying Sundyne fuel gas boosters.
The fuel gas booster is one of the most important pieces of equipment in co-gen power plants, because if the fuel gas compressor fails, the entire power plant stops. Common requirements for fuel gas boosters include: high efficiency across variable suction pressures and several gas turbine operating modes; a small footprint; simplified installation and short delivery times. To address these requirements, Sundyne compressors feature the following:
High efficiency: Sundyne’s high speed digital control system integrates all the compressor control functionality in a single system - including surge protection, load-sharing capabilities, compressor-switching and discharge pressure control. This system has been designed to provide the highest efficiency and reliability, and it can be configured to control compressors in multiple configurations, including: variable inlet guide vanes, suction throttling, variable speed and/or gas recirculation.
Safety: Unlike alternative sealing arrangements such as labyrinth, carbon rings or single seal configurations - Sundyne’s Tandem Dry Gas Seals configuration is the only sealing arrangement to provide a fully controlled gas emission system. This oil-free operation avoids fuel gas contamination and assures greater process stability.
Sundyne’s oil-free design eliminates concerns related to oil contamination. For fuel gas boosting applications, oil content should be less than 1 ppm to guarantee optimal gas combustion in the turbine. Compared to alternative technologies, such as oil-flooded screw compressors, Sundyne’s technology eliminates oil contamination without relying on filtration or separation systems.
Pulsation-free, smooth gas flow: Fuel gas boosting compressors need to continuously deliver a steady supply of fuel gas at pressures needed for optimal gas turbine operation, under all load conditions. Sundyne’s centrifugal technology is specifically designed to deliver smooth, pulse-free flow.
With a smaller footprint than competing technologies (and 75% smaller than volumetric compressor technology), Sundyne’s single-skid packages eliminate the need for large foundations and lengthy installations, making them ideally suited for smaller co-gen facilities (or offshore units) where space and manpower are limited.
Minimal maintenance and maximum uptime are key requirements for profitable power generation. Sundyne compressors are designed for five-year minimum uninterrupted operation.
The ability to provide complete solutions helps to shorten delivery times. Sundyne fully-integrated compressor trains include auxiliary systems such as: air/water cooled gas heat exchangers; nitrogen generators; valve skids, and all the associated monitors & controllers. As a result, third-party packages are not required, which shortens delivery times. While many Sundyne gas compressors are built “fit-for-purpose”- Sundyne also manufactures units to meet stringent API 617 standards.
“Ever-growing demand for cleaner and more affordable energy is increasing the popularity of gas turbine power generation in industrial and commercial power plants – and most of these plants prefer centrifugal compression to boost fuel gas from pipeline pressures to the higher pressures they require,” said Sundyne’s Product Development Manager Jean-Baptiste Aladame. “With more than 50 years of technological development and investment, our gas compressors are specifically tuned to handle fuel gas boosting applications in almost any type of plant.”
To learn more about Sundyne Fuel Gas Boost Compressors, visit: http://www.sundyne.com.
Headquartered in Arvada, Colorado with operations and presence in Europe, the Middle East, India, Asia, Japan and China, Sundyne is a leading manufacturer of precision-engineered highly reliable, safe, and efficient centrifugal pumps and compressors for use in hydrocarbon processing, chemical processing, power generation, industrial, and high-pressure water applications. Sundyne is the world leader in delivering low-flow, high-head integrally geared centrifugal pumps and compressors as well as a leader in the supply of safe and leakage-free sealless magnetic drive centrifugal pumps and diaphragm compressors. Sundyne pumps and compressors designs are compliant with the industry’s most stringent API, ANSI/ASME, and ISO standards. To learn more about the Sundyne family of precision-engineered pumps and compressors, please visit http://www.sundyne.com.