Product/Service

Semi-Automated Dual Slide Maker

Source: Predict/DLI

Semi-Automated Dual Slide Maker
Accurate determination of the wear condition of lubricated components can only be done by observing the size, shape
Predict/DLItermination of the wear condition of lubricated components can only be done by observing the size, shape, composition and concentration of particles contained in a representative sample of lubricating fluid or grease. With knowledge of the component being evaluated, it is possible to predict the wear condition and failure potentials of lubricated components and suggest maintenance actions with a high degree of accuracy. The Ferrogram Maker, FM, is an important step in Analytical Ferrography. Features of this product include:

•No limitations in machine or lubricant type being monitored
•Water contamination has little effect on slide creation
•Once sample is prepared and inserted, the operation is automatic, releasing labor for other tasks
•Easy push button instrument operation
•Controlled sample flow rate ensuring uniform substrate deposition and reproducibility
•Produces two substrates in less than 20 minutes
•Substrates are transparent, allowing differentiation of metallic, organic, and non-metallic particles
•Particles are sorted by magnetic susceptibility and size allowing quick interpretation of particles
•Very little particle ‘stacking' occurs, ensuring that no important particles miss observation

<%=company%>, 9555 Rockside Rd., Cleveland, OH 44125. Tel: 216-642-3223; Fax: 216-642-1484.