The RF-4000 level switch has Bindicator's Pro-Guard electronic protection circuitry that prevents false readings due to build-up of material
Bindicator-4000 level switch has <%=company%> Pro-Guard electronic protection circuitry that prevents false readings due to build-up of material on the probe. With Pro-Guard, sticky, dusty or clinging materials on the RF-4000 probe will not affect sensing accuracy. The switch will signal only when the actual bulk of material (dry, liquid or slurry) contacts the probe. This unit will operate on 12 to 24 VDC, 100 to 120 VAC or 220 to 240 VAC power sources, and the SPDT output relay contacts are at 5 amperes. High- or low-level failsafe selection is available and a time delay option can be set for one to five seconds to prevent unwanted relay fluctuations caused by product turbulence
<%=company%>, 150 Venture Blvd., Spartanburg, SC 296306. Tel: 864-574-8960; Fax: 864-578-7308.