Parting Compounds

Vitta 1AL and 1YT Braz-Stop materials are parting compounds designed to prevent molten filler metal from touching and brazing base metal parts, and to keep holes and cut/milled areas free from molten metals. These materials are also useful in keeping stacks of parts from sticking together during heat-treating, protecting threads from scaling, and for keeping parts from bonding to their furnace fixtures. 1AL Braz-Stop is recommended for general brazing applications and is available as a transfer tape, paste and water based paint. 1YT Braz-Stop is a rare earth composition for use on titanium and reactive base alloys, and is available as a paste, paint, or transfer tape. The compounds clean up easily after brazing with simple brushing, air jetting or washing with water. No grinding or blasting of finished parts is required to remove the compounds.

Vitta Corporation, 7 Trowbridge Dr., Bethel, CT 06801. Tel: 203-790-8155; Fax: 203-778-6478.