Product/Service

Part-Turn Actuators

Source: ABB Measurement & Analytics

Part-Turn Actuators
Part-turn actuators with rated torque of 100 Nm ... 16000 Nm for the operation of final control elements with preferably 90° rotary movement such as flaps, cocks, dampers, etc.
Request Information

Click Here To Download:
Electrical Part-Turn Actuators RHD500 / RHD800 Datasheet
Electrical Part-Turn Actuators PME120-AI/-AN Datasheet
Electrical Part-Turn Actuators RHD1250 / RHD2500 Datasheet

Part-turn actuators with rated torque of 100 Nm ... 16000 Nm for the operation of final control elements with preferably 90° rotary movement such as flaps, cocks, dampers, etc.

A lever / linkage bar assembly transfers the torque or the actuator is directly coupled to the cock flange.

  • Part-Turn Actuators PME/RHD: 100 to 2500 Nm (standard)
  • Part-Turn Actuators PME/RHD: 4000 to 16000 Nm (standard)
  • Pneumatic Part-Turn Actuators Explosion proof (new)
  • Part-Turn Actuators RHDE: 250 to 1250 Nm (explosion proof)
  • Part-Turn Actuators RHDE: 4000 to 16000 Nm (explosion proof)

Part-turn actuators of the RHDE… series are designed for the use in hazardous areas. They are controlled via standard electronic units, loaded with specific data for the explosion-proof actuators. These electronic units for field or rack installation are installed in the non-hazardous area.

Click here to view ABB's full list of Part-Turn Actuators products.

Click Here To Download:
Electrical Part-Turn Actuators RHD500 / RHD800 Datasheet
Electrical Part-Turn Actuators PME120-AI/-AN Datasheet
Electrical Part-Turn Actuators RHD1250 / RHD2500 Datasheet

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information