Featured Article
Flue Gas Analysis As A Diagnostic Tool For Fired Process Heater Furnaces
By Emerson Process Management, Rosemount™

Combustion flue gas analysis has been used by process heater operators for decades as a method of optimizing fuel/air ratio. By measuring the amount of excess oxygen and/or CO in the flue gases resulting from combustion, furnace operators can operate at optimum efficiency and lowest NOx, and also generate the least amount of greenhouse gas. The theoretical ideal, or the stoichiometric point, is where all fuel is reacted with available oxygen in the combustion air and no fuel or O2 is left over.

Featured Downloads
Quick Facts: Dry Sorbent Injection – Giving Your Coal-Fired Power Plant A New Lease On Life!

A recent study showed that use of dry sorbent injection can indeed lengthen the life of some power plants. “Quick Facts: Dry Sorbent Injection – Giving your coal-fired power plant a new lease on life!” will briefly answer some of the most frequently asked questions about this important subject.

Complete Water Analysis For Power Generation
Hach offers the most comprehensive water analysis solution for continuous power generation. From arsenic to zinc, Hach offers reagents and portable, laboratory, and process instruments for more than 100 test parameters — the broadest range for power industry water analysis.
Featured Products And Services
 
AMI INSPECTOR Oxygen
Download Datasheet
Request Information
Swan Analytical USA
 
Grab Style Trash Rakes
Request Information
Evoqua Water Technologies
 
Advanced Dissolved Gas Control
Download Brochure
Request Information
3M Industrial Business Group | Membranes Business Unit