Product/Service

Model 555 Automatic Mains Failure Control

Source: Deep Sea Electronics Plc

Model 555 Automatic Mains Failure Control
The Model 555 is an Automatic Mains Failure Control Module, which has been designed to allow the OEM to meet most of the industry's complex specifications
The Model 555 is an Automatic Mains Failure Control Module, which has been designed to allow the OEM to meet most of the industry's complex specifications. The module is used to detect a mains supply failure, automatically start and stop the engine, indicating the operational status and fault conditions; automatically shutting down the engine and indicating the engine failure by means of an LCD display and a flashing LED on the front panel. Selected operational sequences, timers and alarms can be altered by the customer. Alterations to the system are made by using the 810 interface and a PC. This interface also provides real time diagnostic facilities.

It is also possible to monitor the operation of the system either locally or remotely . (Optional: Remote Communications output version only). Operation of the module is via pushbutton controls (with security locking facility) mounted on the front panel with STOP/RESET, AUTO, TEST, MANUAL and START pushbutton. The former four featuring LED ‘selected' indications. Further pushbuttons provide MUTE/LAMP TEST, LCD PAGE and DISPLAY SCROLL functions. The module features 32-BitMicroprocessor control and a comprehensive list of timers and pre-configured sequences. This allows complex specifications to be easily met.

Deep Sea Electronics Plc, 500 North Michigan Avenue, Chicago, IL 60611. Tel: 001-1723- 377566; Fax: 001-1723-354453.