Lube Oil Conditioner for Small Reservoirs
Source: Kaydon Filtration Products

A lube oil conditioner removes free and emulsified water and solid contamination from small turbine and lube oil reservoirs
A lube oil conditioner removes free and emulsified water and solid contamination from small turbine and lube oil reservoirs at 1 gpm continuous process rate for permanent off-line installation.
Features and ISO Ratings:
- 80% emulsified water removal per single pass (influent 5000 ppm water, 200 ssu maximum)
- 98.7% solide contamination removal (2.8 micrometer absolute rated filters tested per ISO 4572)
- ISO 16/13 particulate cleanliness
- Permanent installation
- Continuous process rate - 1 gpm
- Reservoir capacity - up to 120 gal
- Standard oil – Mineral-based turbine oil
- Nonstandard oils - Requires Kaydon approval
- Standard voltage - 110 VAC
For more information, contact: Kaydon Custom Filtration, 1571 Lukken Industrial Drive W, LaGrange, GA 30240-5756
Fax: 706-883-6199
Need More Information? Just Ask.
Click the button below to directly contact the supplier. Use it to:
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
This website uses cookies to ensure you get the best experience on our website. Learn more