HH-250 Power Pump

Source: Rain for Rent
HH-250 Power Pump
Solids handling capabilities to 3" diameter maximum
  • Solids handling capabilities to 3" diameter maximum
  • Continuous self priming
  • Runs dry unattended
  • Suction lift to 28'
  • Skid or trailer mounted
  • Stainless Steel and CD4MCU Pump Options


  • The HH-250 is direct coupled to a John Deere 6125H diesel fueled engine.
  • The pump and engine are skid or trailer mounted with lifting bracket and integral 24-hour minimum capacity fuel tank.
  • The engine is 12 volt, electric start.
  • A belt driven compressor is fitted to operate the air-ejector priming system.
  • Diesel engines and electric power options are available.

    Material Specifications

  • Standard build is 316 stainless steel open impellers and replaceable wear plates.
  • Pump shaft is 431 stainless steel.
  • All other major pump components are spheroidal graphite cast iron.
  • The mechanical seal, with solid silicon carbide mating faces, is lubricated in an oil bath.
  • 12" and 10" discharge flanges are ANSI 150# FF.

    Rain for Rent, 3404 State Road, P.O. Box 2248, Bakersfield, CA 93303. Tel: 800-742-7246; Fax: 661-393-6897.