Product/Service

DC Watt Transducer

Source: Ohio Semitronics, Inc.

DC Watt Transducer
The PC8 units were designed to provide accurate power measurements on sinusoidal or highly distorted waveforms
Ohio Semitronics, Inc.ts were designed to provide accurate power measurements on sinusoidal or highly distorted waveforms. Basic four-quadrant multiplier response of dc to 20 kilohertz provides operation up to at least the fifth harmonic for dc to 400 hertz applications.

Full-scale accuracy of 1% results for dc, sinusoidal ac, chopped or pulsed waveforms. Time-varying waveforms with a dc component can be accurately measured.

Most units provide bi-directional output so that power consumption or generation can be measured. All units have input/output/ case isolation.

Standard units with input current ranges up to 2000 amperes and voltage ranges to 600 volts are available with outputs to interface with most data calibration or control equipment.

FEATURES

  • Accurate from dc to 400 Hz. Factory calibration traceable to NIST.
  • Input/output isolation.
  • Real-time indication of power with transient response less than 50 microseconds.

APPLICATIONS

  • Accurate monitoring of power that contains dc and/or harmonics.
  • Ideal for use in SCR and other ac or dc switching circuitry.
  • Bi-directional output.

<%=company%>, 4242 Reynolds Drive, Hilliard, OH 43026; Tel.614-777-1005 ext.308. Fax:614-777-4511.