ConduMax W CLS 12 Datasheet

Areas of application

The conductivity measuring cell CLS 12 is designed for industrial and power plant applications (e.g. condensate measurement) where low conductivities must be measured under high pressures and temperatures.

The measuring range of the cells depends on the cell constant k.

• k = 0.01/cm: 0.04 to 20 μS/cm
• k = 0.1/cm: 0.1 to 200 μS/cm

Measuring cells with a Pt 100 temperature sensor are used together with conductivity measuring instruments equipped with automatic temperature compensation:

• Mycom S CLM 153
• Liquisys M CLM 223/253
• MyPro CLM 431

For measurement of specific resistance, MΩ · cm measuring ranges are available in the measuring transmitters of the Mycom and MyPro series.

Benefits at a glance

• Optimum adaptation to process conditions or mounting place due to different designs
• Mounting in pipes or flow chambers
• Application with temperatures of up to 320 °F (160 °C) and pressures of up to 580 psi
• Simple measuring cable connection due to large connection compartment
• Quality certificate stating the individual cell constant