Source: Controls, Inc.
The CM250 is a complete control and communication system for your generator. With the ComMaster, you can remotely monitor, start and stop your generator using a modem or RS232. Also, it will call out to a computer or pager to alert you of a problem. The unit also has provisions for four customer defined, remotely controlled 2 amp relays. Eight addtional digital inputs are also available and can be defined as Pre-Alarms or Faults. Three levels of logins provide different levels of permissions. As with the GM250, continuous Digital readouts of AC Volts, AC Amps, Frequency, Engine Oil Pressure, Water Temperature, and Battery Voltage are displayed on a Large 32 character LCD. Running Time, Set Points and a Custom Message Unit are displayed upon request. Shut Down for Over Crank, Over Speed, Low Oil Pressure, High Water Temperature are standard. Remote and Local Start / Stop Capabilities are standard. Oil pressure, water temperature senders and Wiring Harness is included.
Controls, Inc., 6065 Boneta Road, Medina, OH 44065. Tel: 330-239-4345; Fax: 330-239-2845.