Product/Service

Bearing Analyzer Model BA-96-1

Source: Bii Bearing Services
The model BA-96-1 is a quantitative, instrument designed to evaluate the working surfaces of anti-friction bearings
The model BA-96-1 is a quantitative, instrument designed to evaluate the working surfaces of anti-friction bearings, and is the latest version of a product which is an integral part of overhaul and repair facilities worldwide.

The basic function if the Bearing Analyzer is to measure mechanical vibration, or bearing noise. During use, a test bearing is operated to generate a noise signal, which is then compared to the previously established acceptance criteria. It is this comparison that is used to evaluate the condition of a bearing, it's working surfaces, and degree of wear.

Increased sensitivity and range of control has been designed into the Analyzer to permit measurements for a wide range of bearing sizes, from small instrument bearings, to large Jet engine bearings.

Bearing Inspection supports its Bearing Analyzer with full warranty and a complete selection of accessories.

The final outcome of this comparison is to determine the acceptance or rejection of the bearing for use or overhaul, greatly improving the cost efficiency of your operation.

Bii Bearing Services, 4422 Corporation Center Drive, Los Alamitos, CA 90720-1570. Tel: 714-484-2400; Fax: 714-484-2418.