Product/Service

Analytical Ferrography Optical Microscope

Source: Predict/DLI

Analytical Ferrography Optical Microscope
The Ferroscope FS-5 is the instrument used to observe and identify particles affixed to a glass substrate or other
Predict/DLIope FS-5 is the instrument used to observe and identify particles affixed to a glass substrate or other medium that will fit between the stage and objective lens. This microscope is specially assembled with attachments and options that enhance the art of particle identification and interpretation. It comes with three magnification powers, from 100X to 1,000X. An Analyst can scan a slide quickly at low power looking for obvious abnormal particles, interpret particle origin and wear mechanism at 500 power, and gain more insight into stresses and stress direction using 1,000 power. Other features include:

•Bi-chromatic light (i.e. two light sources, one from top and one from below) is a good method for identifying metallic versus non-metallic debris
•Tilting-head oculars reduce or eliminate neck or shoulder pain associated with fixed oculars
•Optics are infinity corrected eliminating focus problems
•Light source powers are increased in intensity great definition and photography
•Tri-nocular system allows the addition of cameras, including video, 35mm and Polaroid
•Red and green light filters aid in identification of particles
•Polarizers and analyzers help identify particulate and fibrous contamination
•Ergonomic design enables the Analyst to rest arms on the table top while adjusting focus which virtually eliminates carpal tunnel syndrome for frequent users

<%=company%>, 9555 Rockside Rd., Cleveland, OH 44125. Tel: 216-642-3223; Fax: 216-642-1484.