1.5 Megawatt Wind Turbine Gear Unit
The Cincinnati Gear Group has a combined experience of over 100 years in the design and development of epicyclic and parallel shaft power generation gears. This experience and expertise has been key in the development of the 1.5 MW Wind Turbine Gear. The combined parallel shaft / compound epicyclic design provides not only a compact size but also increases the load carrying capacity and service life of the unit while minimizing power losses and unit size.
With 1.66 MW rated power, the design has a calculated life of 20 years with a 1.5 factor of safety for strength and a 1.2 factor of safety for pitting using Miner's rule and a typical wind turbine duty cycle. Features include an integrated oil sump, electric motor driven lube pump, high capacity filtration and visual inspection ports for all gear meshes. The gearbox has an input speed of 20 RPM, an output speed of 1,440 RPM and a ratio of 72:1. All gearing meets AGMA / AWEA 921-A97 and Germanischer Lloyd standards.
Cincinnati Gear Company, 5657 Wooster Pike, Cincinnati, OH 45227. Tel: 513-271-7700; Fax: 513-271-0049.