Dual Output Quarter-brick DC/DC converter
The DualQor converter has a 48V nominal input (35V to 75V range) and meets input voltage transient requirements up to 100V for 100ms. The quarter-brick sized units can deliver up to 12 amps at 3.3Vout or 16 amps at 2.5Vout for a total of 40 Watts of output power. The converter features an industry-standard footprint of 1.45" x 2.3", a low profile of 0.43" and the industry recognized pin out configuration.
SynQor's expansion of the dual output converter line complements their broad offering of single output, high-efficiency converters. Their unique no-baseplate, no-heatsink design offers lower height, weight, cost, and application effort while providing more useable power in less space. Advanced control and protection features include on/off control, voltage trim, short circuit, output over-voltage, and thermal shutdown.
The DualQor series of dc/dc converters is targeted towards the converging telecom and datacom markets. These companies require high power densities with multiple low output voltages to power today's next-generation communications products. SynQor is meeting these challenges by increasing efficiency and output power while reducing converter size and eliminating the need for a heatsink.
The DualQor 3.3/2.5V dual output quarter-brick converters will begin production volume shipping in February 2002 and are available direct from SynQor and through their network of distributors. The standard modules are priced at $104.00 in 1,000 unit quantities. For additional information contact SynQor at 888-567-9596, fax 978-567-9599, e-mail sales@synqor.com or visit our web site for detailed datasheets at www.synqor.com.
SynQor, 188 Central Street, Hudson, MA 01749-1320. Tel: 978-567-9596; Fax: 978-567-9599.