-
Endress+Hauser Introduces Installed Base Audit Program
2/7/2012
Endress+Hauser introduces the Installed Base Audit program, an instrumentation support program that helps plant managers and maintenance departments identify all the process instrument and analyzer measurement devices in the plant, determine maintenance and calibration procedures for each device, keep the devices and processes running at peak efficiency, and reduce Total Cost of Ownership.
-
Membrana Launches Online Membrane Contactor Store To Meet Customer Demand And To Provide Additional Convenience
1/26/2012
Membrana-Charlotte, a Division of Celgard, LLC, recently announced the launch of the new online store, for membrane contactors.
-
Infilco Degremont To Design And Supply A FGD Wastewater Treatment System Retrofit At R.M. Schahfer Generating Station
1/11/2012
The Northern Indiana Public Service Company (NIPSCO) and Owner's Engineers, Sargent & Lundy, haveselected SUEZ ENVIRONNEMENT affiliate Infilco Degremont, Inc. (IDI) and its sister company Anderson Water Power & Technologies to design and supply a retrofit wastewater treatment system for the chloride purge stream from the wet Flue Gas Desulfurization (FGD) at the R. M. Schahfer Generating Station Units 14& 15 in Wheatfield, IN.
-
Aquatech International Expands Portfolio Of Condensate Polishing Technologies Through Strategic Alliance With Wasserbaugesellschaft Kulmbach GmbH
12/7/2011
Aquatech International Corporation, a global leader in water purification technology, has finalized a cooperation agreement with WasserBauGesellschaft Kulmbach GmbH (WBG), a leading water technology company based in Germany, to hold the exclusive North American license for WBG's RSR Plus® Condensate Polishing Technology.
-
Vortex Valves Inaugural Appearance At POWER-GEN 2011
11/30/2011
Vortex Valves North America will exhibit at the largest U.S. power industry tradeshow, POWER-GEN 2011. Vortex will be in Booth 7847 at the Las Vegas Convention Center Dec. 13-15.
-
Membrana Introduces World’s Largest Membrane Degasser in the NEW 14 x 40-inch Liqui-Cel® Membrane Contactor
11/27/2011
Membrana-Charlotte, a leading membrane and degassing device manufacturer, is pleased to introduce the New 14 x 40 Liqui-Cel® Membrane Contactor to its product family. The introduction of this deaeration product extends the Liqui-Cel® product line's capacity from 400 gpm to 550 gpm (125 m3) in a single device. This represents a >30%
increase in capacity and makes the 14 x 40 the largest membrane contactor degassing device available in the world. Larger flow rates are handled by piping multiple contactors
together in parallel.
-
ABB To Offer Special Transformer Training At Power-Gen 2011 In Las Vegas
11/15/2011
ABB, the leading power and automation technology group, announces a special pre-conference training event focused specifically on the importance of transformers at power generation stations.
-
New Module With High Water Hardness Tolerance Expands The Ionpure Portfolio
11/2/2011
Siemens Industry Automation Division has launched the Ionpure VNX CDIT module as an addition to the Ionpure VNX series of modules for continuous electrodeionization (CEDI).
-
Membrana GmbH Introduces Liqui-Flux® W10 Ultrafiltration Module With Variable Connection Options And High Membrane Area
10/27/2011
Membrana GmbH, a leading membrane and membrane device manufacturer, is pleased to announce the introduction of the Liqui-Flux® W10 Ultrafiltration Module that utilizes the proven UltraPES™ polyethersulfone membrane for inside-out operation. With 75m2 of membrane area, this new module design is both functional and durable and also features the innovative Variable Connect Concept - VCC™.
-
Membrana Unveils NEW 8x40 and 8x80 High Pressure Liqui-Cel® Membrane
10/27/2011
Membrana-Charlotte recently announced the introduction of the 8 x 40 and 8 x 80-inch Liqui-Cel® Membrane Contactors to its degassing family of products. This new product design uses ASME code-rated reverse osmosis (RO) vessels for contactor housings.
